Marta San Román (AFEC): In Spain, we are going to need to use air conditioning more and for longer periods
For the Spanish air conditioning market, the summer of 2026 arrived after an exceptionally warm spring and June. Marta San Román, chief executive of the Association of Air Conditioning Equipment Manufacturers (AFEC), explains how new trends are driving the sector and analyses consumer behaviour in the face of rising temperatures over increasingly prolonged periods.
How is the heat driving the air conditioning market in Spain?
We are experiencing very high temperatures for longer periods, and the intensity and duration of this heat are influencing the decisions made by households, shops and businesses. In 2026, AEMET recorded conditions typical of the height of summer from the second half of May until the first half of September; these were four months during which air conditioning became practically essential.
In this context, we are bringing forward decisions that we might otherwise postpone: replacing old equipment, installing air conditioning in homes that were without, or upgrading existing systems. What’s more, we are using these systems for longer periods, while at the same time becoming more aware of the thermal quality – or lack thereof – of buildings.
Our perception of air conditioning is also changing. When indoor temperatures remain so high for weeks on end, we are no longer simply seeking comfort, but rather ensuring that our homes remain liveable, so that we can rest, so that we can work productively, and even so that we stay healthy.
It is clear that when it is hotter for longer periods, the demand for air conditioning increases. However, we cannot say that a particular increase in sales is due solely to the temperatures. Other factors at play include the economic situation, construction, accumulated stock in the supply chain, refurbishment, the replacement of old equipment and many others.
What changes have there been compared with previous years?
What changes when the heat is no longer confined to just a few days but lasts for months? If I had to single out one thing about this year, it would be this: the persistent heat. AEMET’s latest report ranks the period from June to August 2026 as the second-hottest summer on record, after 2025, and notes that typical summer conditions lasted for four months. In 2026 there were 61 days of heatwave conditions on the Iberian Peninsula and the Balearic Islands, compared with 41 in 2022 and 36 in 2025.
And that duration matters a great deal. It is not the same to experience a brief spike in temperature lasting a few hours as it is to endure days and weeks of heat, with buildings trapping the heat and nights when they barely cool down at all. That also extends the period during which we need cooling. May and September are becoming particularly important, and, ultimately, we are using the equipment for more months and for longer periods.
And that also means we start to look more at the building as a whole. The system must, of course, be efficient, but other factors also play a part, such as insulation, solar protection, ventilation when it is cooler outside, control, maintenance, the potential to use photovoltaic and solar thermal energy generation, and the recovery of surplus energy. It all adds up to achieving a comfortable indoor temperature while using as little energy as possible.
Is the same thing happening in other countries?
Yes, although each country starts from a different position. The climate, the buildings, the number of households that already have air conditioning, and usage patterns vary greatly from one market the next.
How can we compare? At AFEC we use cooling degree days (CDDs), an official technical indicator used by Eurostat to compare cooling requirements. CDDs combine the extent to which the outdoor temperature exceeds a reference threshold and the duration of that exceedance. It is used to estimate how much energy is needed to cool a building.
The European Union average has risen from 56 CDDs in 1995 to 128 in 2025. Spain – like other countries in southern Europe – was already starting from much higher figures, and some regions have recorded very significant increases: between 1995 and 2025, Murcia saw an increase of 336 CDDs and the Valencian Community 313; by 2025, Extremadura, Murcia and Andalusia had exceeded 600.
This significant increase in CDDs means higher consumption; that is why energy efficiency is so important. According to Eurostat, the amount of energy used for cooling in European households almost doubled between 2018 and 2024. Italy, Spain and Greece were the countries with the highest total consumption for this purpose.
In Spain and other southern countries, we have been dealing with the need to cool buildings for many years. And in other parts of Europe, longer and more intense heatwaves are leading to much greater attention being paid to indoor temperatures and how well buildings are equipped to cope with them.
That’s why it is advisable to avoid making direct comparisons of market figures without first checking what each statistic measures. One unit sold, one home fitted out, installed capacity or energy consumed may all describe different realities.
How are consumers behaving in the face of gradually rising temperatures?
When the hot weather lasts for several weeks and we use air conditioning for longer hours, what we look for in an air conditioning unit also changes. We are more concerned with how much energy it uses, how we regulate the temperature, when it operates and the conditions in which it is kept.
And here I would like to draw a distinction between solutions that do different things. Ventilation refreshes the air and, when it is cooler outside, can also help to remove heat from the building. A fan circulates the air and improves the perceived temperature, but it does not lower the temperature in the room.
Evaporative coolers can indeed lower the air temperature through the evaporation of water, but their effectiveness is greatly reduced in humid conditions. That is why they are mainly used in dry areas, and their temperature control is considerably more limited than that of a heat-pump air conditioning system. In direct systems, indoor air humidity also increases. Indirect systems prevent this influx of moisture, but they require additional heat exchangers, fans and pumps, thereby losing some of the ease of installation, low cost and energy efficiency associated with direct evaporative cooling.
With heat pumps, we can maintain the indoor temperature without the cooling capacity being dependent on the outside air being dry. From there, the right solution will depend on the building, the climate, its use and the level of temperature control required. In some applications, it also makes sense to combine different technologies.
Another advantage is that, for many years now, the vast majority of air conditioning units are reversible: the same system that cools in summer can provide heating in winter. We therefore have heating and cooling all year round, using technology which, on average, triples or quadruples the efficiency of any conventional boiler.
And we must not forget that there are households that are less able to maintain a suitable temperature in summer, and that measures to adapt to rising temperatures must take particular account of the most vulnerable groups.
How important is temperature control when it comes to health in the workplace?
We’re talking about extreme heat, and temperature control is a matter of health. The World Health Organisation warns that high temperatures can lead to exhaustion and heatstroke, as well as exacerbating cardiovascular, respiratory or kidney conditions. Older people, young children and those with certain medical conditions are particularly vulnerable.
By the end of August, the MoMo system – Daily Mortality Monitoring System (MoMo) – had already estimated over 5,200 deaths attributable to high temperatures in Spain, compared to 3,832 during the whole campaign in 2025. These are statistical estimates, not individually certified deaths from heatstroke, but they demonstrate quite clearly the impact that high temperatures have on health.
We must distinguish between comfort and protection. Being in a comfortable temperature improves our well-being, but during a heatwave, maintaining a safe indoor temperature is essential for our health.
The building itself can be a great help. Good insulation, sun protection, shading or night-time ventilation when it cools down outside reduce the amount of heat that enters and builds up. However, when these measures are not sufficient, air conditioning is needed to maintain suitable indoor conditions.
Protecting health indoors is not just a matter of controlling the temperature either. It is important to maintain good indoor air quality (IAQ) through appropriate ventilation, filtration and humidity control. Temperature control must ensure both suitable thermal and environmental conditions.
I would also like to make it clear that air conditioning units do not cause urban heat islands. We must be rigorous and avoid presenting them as a direct cause. These systems are part of the solution: they extract heat from inside buildings and discharge it outside, along with the additional heat associated with the energy they consume. And we do this precisely because we need to maintain indoor conditions that protect people’s health and wellbeing.
Heat islands are caused primarily by the layout of the city, the materials and surfaces that absorb solar radiation, lack of vegetation, traffic and other sources of heat. To reduce this effect, we must focus, first and foremost, on the city; and then on the buildings. And finally, on the efficiency and performance of air conditioning systems, with increasingly stringent regulatory requirements and continuous improvements in performance thanks to the innovation and development efforts of AFEC manufacturers.
What other issues arise from this new situation?
I believe we will have to place much greater emphasis on adapting to the heat in the design, regeneration and operation of cities and buildings. It affects homes, schools, care homes, hospitals, offices, shops and industrial premises, and each type of building requires a different approach.
We also need to look at the problem from various perspectives. In the city, vegetation, shade, building materials and the urban design itself can reduce heat build-up. In buildings, insulation, the building envelope and solar shading help limit thermal loads. And within the premises, energy-efficient equipment, monitoring and correct maintenance help maintain suitable indoor conditions while reducing energy consumption.
Furthermore, a significant proportion of the demand for cooling coincides with periods of high photovoltaic or solar thermal generation. This presents an opportunity to make better use of that electricity through smart control, demand management, storage and connected buildings.
In Spain, we are going to need to use air conditioning more and for longer periods. Air conditioning technology is highly advanced, subject to stringent regulatory requirements, and continues to make progress in terms of efficiency, control and performance. There is still scope for reducing thermal loads and improving the thermal performance of buildings. The electricity grid is also evolving, incorporating ever-greater flexibility, demand management, storage and renewable generation to meet growing electrification and a demand for air conditioning over longer periods.